Description
1GW atomic reactor that fits neatly inside a tier 3 Factorissimo2 building
Be sure to set power to "output" mode with a 2GW max after it warms up! (Use the yellow arrow below the substation; press R to set transfer outbound, then Shift-R to increase throughput to 2GW.) It also helps to set the fluid direction to "inbound" on each of the water intake connections.
Also, four intake pipes per side is kind of overkill -- each side requires (max) 3600 water/s, which you could (barely) accomplish with three pumps and bridging all of the input-side water connectors together; or, two if you can get at least 1500 water/sec to each. Having four allows you to be somewhat sloppy with the plumbing (as no input requires more than 960 water/sec) and makes the plumbing more linear, which should keep the cpu load down, resulting in better fps.
