1 Rocket Per Minute Plastic

v2 of Beacon Advanced Oil Production

This is a circuit network enabled advanced oil processing plant. The current conditions are simple, and set as follows:

• IF flamethrower fuel < 200 -- make fuel (requires steel from, and provides fuel to logistics network)
• IF lube in storage tank < 6k OR heavy oil > 6k -- make lube
• IF heavy oil > 7k -- crack heavy oil --> light oil
• IF light oil > 6k -- crack light oil --> petrol

Once battery, sulfuric acid, and lube production back up, there will be a surplus of petroleum. This factory is designed to run at 100% without interrupting 1RPM required rates.

1. *Outputs *

• two saturated blue belts of plastic
• one storage tank of lube
• storage tank of sulfuric acid.

2. Required inputs:

• Top right: Water + oil
• Top left: Water + oil
• Mid right: Water
• Low/Mid left: 2x Coal - requires two 75% saturated blue belts
• Low right: Iron plates - requires 30% saturation of one blue belt

Note: Each plastic production line consumes 1.8k coal per minute, average blue belt throughput is 2.4k coal per minute.

3. Production rates:

• Petroleum: 94k / min
• Sulfuric Acid: 15k / min
• Lube: 7.8k / min
• Plastic bar: 9.4k / min (four saturated blue belts)
• Batteries: 700 / min

Note: This oil setup output is about half of what you would need for the plastic required to produce 1 rocket per minute.